Military Defence – aatlinex

Military & Defense APPLICATIONS

LIST OF MILITARY APPLICATIONS :

Blast Mitigation and Reduction Of Stand off distance by 80% for Strategic Buildings and installations
Blast Mitigation Protection for Aircraft Concrete Installations.
Spalling Protection against Explosion of Fragments.
Protection of Sea – Land Personnel Carriers.

With our advanced spray-on application technology, PAXCON can easily be applied to an armored vest’s ballistic plates. And since PAXCON cures quickly, those vests will be back in service quickly. Let’s work together to keep our servicemen and women safe. Reach out to

Protective Coatings and

today.

LIST OF MILITARY APPLICATIONS :

As everyone Knows; LINEX is the Global Leader of Protection for Security Posts, Buildings, All Types of Vehicles, Trucks, Tanker Cars from Bomb Blasts, Bullets Rust and Corrosion for the Past 28 Years.
It is Licensed Only to Countries that are Trade Friends with USA., and Distributed to 65 Countries Worldwide.
Main LINEX Materials Used are XS-100 and XS-350, Both are Guaranteed for LIFE, With Shelf Life of 24 Months in its Original 55 Gal. Drums.
They Come in Natural and Black Colors from US Manufacture and Accept Colors, Dark Colors such as ; Blue, Red and Green will last Longer than Light Colors but Change of Colors under UV, will not affect Quality.
For Large User Clients, We highly Recommend Receiving Special Training on their Application in LINEX Training School in USA, AAT shall Facilitate Such Training with order of 38 Sets in 40’ Container and One Graco Machine.

Main US Military Uses at International Bases againest Potential Terrorist Attacks :

1 – Bomb Blast Mitigation for Targeted Security Posts :

Interior and Exterior Facing Walls of Posts using PAXCON PAX 3350 or XS-350 at 3,000 Microns Min. Thickness (8.25 LB / m2).and
Headquarters in unprotected areas can be coated in its entire wall area by XS-350 from outside or inside at 6.0 mm for first floor only.
Protecting Lives on Board of Vehicles from side bombs on the Road Will use LINEX Coating XS-350 all around the Vehicle at 3.0 mm Thickness inside and Outside , OR use 1” Dyneema Sheets cut to size Coated with LINEX XS-350 Inside the Grooves Of the Doors.

2 – PROTECTING LIVES ON BOARD VEHICLES FROM BOMB BLAST UNDER CARRIEGE WITHOUT USE OF LINEX COATING ON V SHAPED :

Adding V Shaped Steel Plates 3-4 mm thick. under the ENTIRE full LENGTH & WIDTH of the Vehicle So that the Lowest Point of the V Shaped can cause the SPLIT of the Blast Wave to Both Sides of The VEHICLE, This Solution Does not Require any LINEX Coating, It is Based on Splitting The Blast Wave to Two Equal Parts and allow it to move freely out of the Vehicle to reduce and Minimize the Lift Pressure to outside of It.

3 – Protecting Lives On Board Vehicles From Bullets :

External Surfaces of Vehicles Doors using XS-100 at 6.0 mm to Resist
The Following Bullet Calibers:

1- 7.62 x 39
2– 7.62 x 51
3– 5.56 x 45

And Use Bullet Proof Glass for Windows.

For Higher Caliber of Bullets Use Dyneema Sheets 1” cut to Size and Coated with LINEX XS-350 at 1.5 mm Thick, to Place in Grooves of Doors

4 – Protecting All Types of Cars, Trucks, Tankers from Rust for LIFE :

Truck Beds, Use LINEX XS-100 / XS-350 at Thickness 2 – 3 mm On Interior Sides, Floor and Rails.
To Strengthen The Body of the Car and Protect from Rust < Use XS-100 Or XS-350 All around at Thickness of 2.0 mm.
Protect The Interiors of Tanker Cars that Transport Water or Fuel (Benzene, Kerosene,.. etc) from Rust and Prolong its Life for LIFE by Coating It with LINEX XS-350 at 2.0 mm Thickness